Perhaps among peers'm resetter Service Tool v3400 this. We will share a link Resetter Service Tool v3400.
Resetter Canon Service Tool v3400 is already on trial on the Canon MG5270 printer and successfully, on carany below:
Turn Printer Canon MP287, MP287 LCD panel then will appear E08 error, and no description of "The Ink Absorber is Almost Full" screen of your monitor.
Download Resetter MP287 at THIS LINK. You will be redirected to the first ad, then click SKIP ADS / SKIP.
Canon MP287 printer must be in a state of SERVICE MODE. See how the next step.
Turn off the Canon MP287 error E08 by pressing power. Do not unplug the power cord
Press and Hold the STOP / RESET followed by pressing the POWER button. So both buttons depressed position.
Remove the STOP / RESET but do not release the POWER button.
In circumstances POWER button still depressed, press the STOP / RESET 6 times.
Then release both buttons simultaneously. Then the Canon MP287 will be in the Service Mode.
LCD Panel MP287 will be blank / dark and your computer will detect the new hardware. Ignore it ...
You still with ekohasan blog, and the next step Exctract Run Service Tool for MP287 MP287 error E08 you downloaded earlier.
Clear ink absorber in the menu select Main counter then click SET to the right.
In the menu select Main ink absorber counter then click SET to the right.
Then click EEOPROM. the printer will print 1 page.
Canon MP287 printer error E08 which will be normal again.
Hopefully iP2770 printer, MP287 oft-errant would not be reset by resetter Canon Service Tool v3400 can be reset and reused.
Please download .SERVICE TOOL RESETER PRINTER